Governor (device)

This article is about the concept of self-limiting in mechanics. For other uses, see Self-limiting.
For other uses, see governor (disambiguation).

A governor, or speed limiter, is a device used to measure and regulate the speed of a machine, such as an engine.

A classic example is the centrifugal governor, also known as the Watt or fly-ball governor on a reciprocating steam engine, which uses the effect of centrifugal force on rotating weights driven by the machine output shaft to regulate its speed by altering the input flow of steam. Two types of governor centrifugal or inertia


See also: Control theory
Cut-away drawing of steam engine speed governor. The valve starts fully open at zero speed, and is closed as the balls rotate and rise. The speed sensing drive shaft is top right
Porter governor on a Corliss steam engine

Centrifugal governors were used to regulate the distance and pressure between millstones in windmills since the 17th century. Early steam engines employed a purely reciprocating motion, and were used for pumping water – an application that could tolerate variations in the working speed.

It was not until the Scottish engineer James Watt introduced the rotative steam engine, for driving factory machinery, that a constant operating speed became necessary. Between the years 1775 and 1800, Watt, in partnership with industrialist Matthew Boulton, produced some 500 rotative beam engines. At the heart of these engines was Watt’s self-designed "conical pendulum" governor: a set of revolving steel balls attached to a vertical spindle by link arms, where the controlling force consists of the weight of the balls.

The theoretical basis for the operation of governors was described by James Clerk Maxwell in 1868 in his seminal paper 'On Governors'.[1]

Building on Watt’s design was American engineer Willard Gibbs who in 1872 theoretically analyzed Watt’s conical pendulum governor from a mathematical energy balance perspective. During his Graduate school years at Yale University, Gibbs observed that the operation of the device in practice was beset with the disadvantages of sluggishness and a tendency to over-correct for the changes in speed it was supposed to control.[2]

Gibbs theorized that, analogous to the equilibrium of the simple Watt governor (which depends on the balancing of two torques: one due to the weight of the "balls" and the other due to their rotation), thermodynamic equilibrium for any work producing thermodynamic system depends on the balance of two entities. The first is the heat energy supplied to the intermediate substance, and the second is the work energy performed by the intermediate substance. In this case, the intermediate substance is steam.

These sorts of theoretical investigations culminated in the 1876 publication of the Gibbs' famous work On the Equilibrium of Heterogeneous Substances and in the construction of the Gibbs’ governor. These formulations are ubiquitous today in the natural sciences in the form of the Gibbs' free energy equation, which is used to determine the equilibrium of chemical reactions; also known as Gibbs equilibrium.[3]

Speed limiters

Main article: Speed limiter

Governors can be used to limit the top speed for vehicles, and for some classes of vehicle such devices are a legal requirement. They can more generally be used to limit the rotational speed of the internal combustion engine or protect the engine from damage due to excessive rotational speed.


Today, BMW, Audi, Volkswagen and Mercedes-Benz limit their production cars to 250 kilometres per hour (155 mph). Certain Quattro GmbH and AMG cars, and the Mercedes/McLaren SLR is an exception. The BMW Rolls-Royces are limited to 240 kilometres per hour (149 mph). Jaguars, although British, also have a limiter, as do the Swedish Saab and Volvo on cars where it is necessary.

German manufacturers initially started the "gentlemen's agreement", electronically limiting their vehicles to a top speed of 250 kilometres per hour (155 mph),[4][5] since such high speeds are more likely on the Autobahn. This was done to reduce the political desire to introduce a legal speed limit.

In European markets, General Motors Europe sometimes choose to discount the agreement, meaning that certain high-powered Opel or Vauxhall cars can exceed the 250 kilometres per hour (155 mph) mark, whereas their Cadillacs do not. Ferrari, Lamborghini, Maserati, Porsche, Aston Martin and Bentley also do not limit their cars, at least not to 250 kilometres per hour (155 mph). The Chrysler 300C SRT8 is limited to 270 km/h. Most Japanese domestic market vehicles are limited to only 180 kilometres per hour (112 mph) or 190 kilometres per hour (118 mph).[6] The top speed is a strong sales argument, though speeds above about 300 kilometres per hour (190 mph) are not likely reachable on public roads.

Many performance cars are limited to a speed of 250 kilometres per hour (155 mph)[7] to limit insurance costs of the vehicle, and reduce the risk of tires failing.


Mopeds in the United Kingdom have had to have a 30 mph (48 km/h) speed limiter since 1977.[8] Most other European countries have similar rules (see the main article).

Public services vehicles

Public service vehicles often have a legislated top speed. Scheduled coach services in the United kingdom (and also bus services) are limited to 65 mph.[9]

Urban public buses often have speed governors which are typically set to between 65 kilometres per hour (40 mph) and 100 kilometres per hour (62 mph).

Trucks (HGVs)

All heavy vehicles in Europe and New Zealand have law/by-law governors that limits their speeds to 90 kilometres per hour (56 mph) or 100 kilometres per hour (62 mph). Fire engines and other emergency vehicles are exempt from this requirement.

Example uses


Aircraft propellers are another application. The governor senses shaft RPM, and adjusts or controls the angle of the blades to vary the torque load on the engine. Thus as the aircraft speeds up (as in a dive) or slows (in climb) the RPM is held constant.

Small engines

Small engines, such as used to power lawn mowers, portable generators, and lawn and garden tractors, are equipped with a governor to limit fuel to the engine to a maximum safe speed when unloaded and to maintain a relatively constant speed despite changes in loading. In the case of generator applications, the engine speed must be closely controlled so the output frequency of the generator will remain reasonably constant.

Small engine governors are typically one of three types:

Turbine controls

Operation of a flyball governor to control speeds of a water turbine

In steam turbines, the steam turbine governing is the procedure of monitoring and controlling the flow rate of steam into the turbine with the objective of maintaining its speed of rotation as constant. The flow rate of steam is monitored and controlled by interposing valves between the boiler and the turbine.[10]

In water turbines, governors have been used since the mid-19th century to control their speed. A typical system would use a Flyball governor acting directly on the turbine input valve or the wicket gate to control the amount of water entering the turbine. By 1930, mechanical governors started to use PID controllers for more precise control. In the later part of the twentieth century, electronic governors and digital systems started to replace mechanical governors.[11]

See also


  1. Bennett, Stuart (1992). A history of control engineering, 1930-1955. IET. p. p. 48. ISBN 978-0-86341-299-8.
  2. Wheeler, Lynder Phelps (1947), "The Gibbs Governor for Steam Engines", in Wheeler, Lynder Phelps; Waters, Everett Oyler; Dudley, Samuel William, The Early Work of Willard Gibbs in Applied Mechanics, New York: Henry Schuman, pp. 63–78
  3. Wheeler, L. (1951). Josiah Willard Gibbs - the History of a Great Mind. Woodbridge, CT: Ox Bow Press.
  4. Bogdan Popa. "Gentlemen's Agreement: Not So Fast, Sir!". autoevolution.
  5. van Gorp, Anke. "Ethical Issues in Engineering Design; Safety and Sustainability" page 16. Published by 3TU Ethics, 2005. ISBN 9090199071, 9789090199078 . ISSN 1574-941X
  6. "Why Japan finally got its foot off the brake | The Japan Times Online". 2008-04-13. Retrieved 2012-11-08.
  7. Mike Spinelli. "So Long Guv'nor: Mercedes Will Unlock Top Speed on AMG Models in the US, for a Price". Jalopnik.
  8. Department for Transport (2008). "Reported Road Casualties Great Britain: 2008 Annual Report" (PDF). Retrieved 2010-01-09. p.179 states: "Mopeds redefined to 30 mph maximum design speed"
  9. "History of British road safety". Retrieved 2010-01-20.
  10. Rathore, M.M. (2010). Thermal engineering. New Delhi: Tata McGraw-Hill Education. ISBN 978-0-07-068113-2. Retrieved 29 January 2015.
  11. Fasol, Karl Heinz (August 2002). "A Short History of Hydropower Control" (PDF). IEEE Control Systems Magazine: 68–76. Retrieved 29 January 2015.
Wikimedia Commons has media related to Governor (device).
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.